The Weha 14" x 1 1/2" Milling Wheel is designed for planing down bridge saw beds and concrete beds, flattening, dressing, and smoothing out table surfaces from saw cuts.

It is also excellent for milling down granite, quartz, and stone for backsplashes, full slabs, and more.

Specifications:

Diameter: 14"
Width: 1 1/2"
Arbor: 60mm
Steel body
Recommended RPM: 1450-1550

The Weha Low Horse Power Diamond Saw Blade is designed specifically for rail saws, track saws, and tile saws with motors of 3 HP or less.

With a total outside diameter of 13 7/8", this blade fits perfectly on the Blue Ripper Rail Saw and inside other saws with a 14" blade housing. It is also an excellent choice for the Achilli TSA 3 HP Portable Track Saw, offering outstanding performance for low HP applications.

Specifications:

Outside Diameter: 13 7/8"
Arbor: 60mm
Segment Height: 10mm

The Weha 5" Vacuum Brazed Marble Contour Blade is specifically designed for cutting vanity holes and radius circle cuts in marble and other soft stones like limestone and travertine.

The vacuum brazed diamond grit used to manufacture this blade ensures minimal chipping and provides the cleanest cuts of any diamond contour blade on marble, making it perfect for marble vanity bowl cuts.

The diamonds extend a full 1 1/4" down the blade, allowing for easy bowl cutting and tight radius cuts.

Features:

Very aggressive cutting
Excellent blade life
Vacuum brazed for longevity and speed
Arbor: 7/8"-5/8" included

The Weha Vacuum Brazed Marble Blade is designed specifically for cutting marble, limestone, travertine, and other soft stones, delivering virtually chip-free cuts.

nan

The Weha Cougar Diamond Blade, with a 25mm segment height, is designed for cutting a wide range of stones, including granite, engineered stone, and hard marbles. Its layered diamond segment design ensures fast, clean cuts, optimizing performance on bridge saws and reducing amp usage.

The Cougar Blade is built for bridge saws with motors of 10+ horsepower, offering one of the longest lifespans on the market. The cost per linear foot of cut with the Cougar Bridge Saw Blade is among the lowest, making it an excellent value.

What makes the Cougar the best 25mm Diamond Bridge Saw Blade?

Layered diamond technology: Delivers fast, clean cuts by keeping diamonds constantly in contact with the stone for maximum cutting speed.
Special segment design: The 25mm height allows for excellent water flow, slurry removal, and cooling, leading to a long blade life.
Cost efficiency: Offers the lowest cost per linear foot of cut.
Blade Specifications:

Diameter: 14"
Segment Height: 25mm
Arbor: 60/50
Recommended for 10+ HP saws
Layered diamond technology for optimal cutting speed and performance

The Weha Blitz 14" 3DX Granite Diamond Bridge Saw Blade sets a new standard for premium diamond blades. Engineered with 3D pattern technology throughout the entire diamond segment, the Blitz 3DX Granite and Quartz Blade ensures the maximum number of diamonds contact the stone at any given time.

This 3D technology creates the longest-lasting blade on the market, offering up to 35% longer life compared to other premium blades.

Built on a premium Silent Steel Core, the 14" Blitz 3DX Granite Bridge Saw Blade will not flex or lose tension, making it ideal for faster production work while maintaining excellent cutting life.

The Weha Blitz comes in two segment heights—20mm and 25mm—allowing shops to choose the blade that best suits their needs. Testing has consistently shown a 35% longer life for both the 20mm and 25mm blades compared to similar blades in the market.

This blade is outstanding for 45-degree miter cuts, with a strong core that prevents flexing when cutting granite, engineered stone, and quartz materials.

Key Features:

Up to 35% longer life than other premium bridge saw blades
3D Diamond Placement Technology for optimal cutting
Premium Silent Core for noise reduction, no flexing, and maintaining tension
Includes 60/50 bushing

The Weha Blitz Ultra Premium Quad Diamond Turbo Blades are engineered to surpass the quality, performance, and lifespan of other premium-grade blades on the market today.

Designed specifically for granite, quartz, and engineered stone, the Blitz blade excels in cutting these materials. While it can cut other stones, it was purpose-built for granite and quartz applications.

Based on real-life fabricator feedback, the blade s life expectancy ranges from 110 to 140 linear feet of cutting, suitable for both shop and installation use. The blade leaves an exceptionally smooth finish—smooth as a baby’s bottom!

Features:

Air cooling holes for continuous cutting and to keep the blade cool
Solid, stiff core to prevent deflection, bending, or flexing during cuts
Dry use (Can also be used wet)
Specifications: 6" x 7/8" - 5/8" - 22mm Arbor with 8mm Quad Holes
Max RPM: 10,000

The Weha Cougar Diamond Blade, with a 25mm segment height, is designed for cutting a wide range of stones, including granite, engineered stone, and hard marbles. Its layered diamond segment design ensures fast, clean cuts, optimizing performance on bridge saws and reducing amp usage.

The Cougar Blade is built for bridge saws with motors of 10+ horsepower, offering one of the longest lifespans on the market. The cost per linear foot of cut with the Cougar Bridge Saw Blade is among the lowest, making it an excellent value.

What makes the Cougar the best 25mm Diamond Bridge Saw Blade?

Layered diamond technology: Delivers fast, clean cuts by keeping diamonds constantly in contact with the stone for maximum cutting speed.
Special segment design: The 25mm height allows for excellent water flow, slurry removal, and cooling, leading to a long blade life.
Cost efficiency: Offers the lowest cost per linear foot of cut.
Blade Specifications:

Diameter: 14"
Segment Height: 25mm
Arbor: 60/50
Recommended for 10+ HP saws
Layered diamond technology for optimal cutting speed and performance

The Weha Blitz Ultra Premium Quad Diamond Turbo Blades are engineered to surpass the quality, performance, and lifespan of other premium-grade blades on the market today.

Designed specifically for granite, quartz, and engineered stone, the Blitz blade excels in cutting these materials. While it can cut other stones, it was purpose-built for granite and quartz applications.

Based on real-life fabricator feedback, the blade s life expectancy ranges from 110 to 140 linear feet of cutting, suitable for both shop and installation use. The blade leaves an exceptionally smooth finish—smooth as a baby’s bottom!

Features:

Air cooling holes for continuous cutting and to keep the blade cool
Solid, stiff core to prevent deflection, bending, or flexing during cuts
Dry use (Can also be used wet)
Specifications: 6" x 7/8" - 5/8" - 22mm Arbor with 8mm Quad Holes
Max RPM: 10,000

The Weha Ceramica Thin Cut Turbo Blade is an extra-thin blade designed for fast, clean cuts on materials like Lapitec, Dekton, and Neolith. The special turbo design efficiently removes material while providing maximum airflow to keep the blade cool during dry use, resulting in super clean cuts with minimal chipping.

At only 1.2mm thick, this blade cuts ceramic, porcelain, granite, engineered stone, and quartzite cleaner than any other turbo blade on the market.

Features:

Ultra-thin 1.2mm blade for clean, precise cuts
Designed for dry use (Can also be used wet)
Arbor: 7/8" x 5/8"
Max RPM: 12,200

The Weha Blitz Ultra Premium Quad Diamond Turbo Blades are engineered to surpass the quality, performance, and lifespan of other premium-grade blades on the market today.

Designed specifically for granite, quartz, and engineered stone, the Blitz blade excels in cutting these materials. While it can cut other stones, it was purpose-built for granite and quartz applications.

Based on real-life fabricator feedback, the blade s life expectancy ranges from 110 to 140 linear feet of cutting, suitable for both shop and installation use. The blade leaves an exceptionally smooth finish—smooth as a baby’s bottom!

Features:

Air cooling holes for continuous cutting and to keep the blade cool
Solid, stiff core to prevent deflection, bending, or flexing during cuts
Dry use (Can also be used wet)
Specifications: 6" x 7/8" - 5/8" - 22mm Arbor with 8mm Quad Holes
Max RPM: 10,000

The Weha Ceramica Thin Cut Turbo Blade is an extra-thin blade designed for fast, clean cuts on materials like Lapitec, Dekton, and Neolith. The special turbo design efficiently removes material while providing maximum airflow to keep the blade cool during dry use, resulting in super clean cuts with minimal chipping.

At only 1.2mm thick, this blade cuts ceramic, porcelain, granite, engineered stone, and quartzite cleaner than any other turbo blade on the market.

Features:

Ultra-thin 1.2mm blade for clean, precise cuts
Designed for dry use (Can also be used wet)
Arbor: 7/8" x 5/8"
Max RPM: 12,200

Weha Continuous Rim Blades are engineered for fast, chip-free cutting and long-lasting performance, thanks to their high diamond concentration. These blades are specifically designed for cutting natural stone and glass materials.

The Weha Continuous Rim Diamond Blade is designed to provide chip-free, fast cuts with excellent durability due to its high diamond concentration. This blade is specifically crafted for cutting natural stone and glass materials.

Specifications:

Diameter: 4"
Arbor: 20mm
Diamond Rim Height: 7mm
Suitable for wet or dry use on Granite Transformations materials
Premium Quality
Excellent performance on natural stone
Chip-free cuts on glass material
Ideal for mosaic tile

Weha Continuous Rim Blades are engineered for fast, chip-free cutting and long-lasting performance, thanks to their high diamond concentration. These blades are specifically designed for cutting natural stone and glass materials.

Weha Continuous Rim Blades are engineered for fast, chip-free cutting and long-lasting performance, thanks to their high diamond concentration. These blades are specifically designed for cutting natural stone and glass materials.

The Weha Continuous Rim Diamond Blade is designed to provide chip-free, fast cuts with excellent durability due to its high diamond concentration. This blade is specifically crafted for cutting natural stone and glass materials.

Specifications:

Diameter: 4"
Arbor: 20mm
Diamond Rim Height: 7mm
Suitable for wet or dry use on Granite Transformations materials
Premium Quality
Excellent performance on natural stone
Chip-free cuts on glass material
Ideal for mosaic tile

The Weha 4" x 1/4" Diamond Turbo Rodding Blade is designed for cutting Granite, Marble, Engineered Stone, Quartz, Quartzite, Concrete, and Countertops.

This blade is specifically crafted to increase the speed of cutting rodding channels for 1/8" thick fiberglass and metal rods. With a full 10mm height of diamond and cooling holes, the Weha Turbo Rodding Blade cuts as fast as a turbo blade while creating a 1/4" wide square notch for the rods.

The Rodding Turbo Blade consists of two Weha EB blades separated by 1/8" thick metal, all welded together. When cutting, the blade removes the stone between the blades, leaving a clean 1/4" wide groove.

Arbor: 7/8", 20mm, 5/8"
Suitable for wet or dry use
Max RPM: 12,200

The Weha GR 29 Split Segment Diamond Bridge Saw Blade is engineered to remove slurry quickly, ensuring maximum water flow between the segments and stone for fast, efficient cutting.

Featuring a European-style segment design with two segments per landing, this blade cuts through stone extremely cleanly and rapidly. The 20mm segment height offers exceptional blade life, making it ideal for cutting granite, engineered stone, and hard marble.

Specifications:

Austrian Segments
German Silent Core Body
Segment Height: 20mm
Arbor: 60mm
Designed for all 10+ horsepower bridge saws